What We Do | Brunswick Roofing & Maintenance Roofing Services
Brunswick Roofing & Maintenance provides residential and commercial roofing services throughout Brunswick and Shelby, Ulysses, Abie, Benkelman, Chappell. Free estimates on every service listed here.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →Roof Repair
Missing shingles from wind damage expose the underlayment to UV degradation. If the underlayment is compromised, water intrusion follows the next rain. We don't just replace the missing shingle. We pull back surrounding courses, inspect the underlayment for UV damage and nail holes, replace compromised sections, and weave new CertainTeed Landmark or IKO Cambridge shingles into the existing field. Proper repair, not a patch.
Get a Free Quote →Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →New Roof Installation
New construction means we get to do everything right from scratch. No compromises, no working around someone else's mistakes. Ice and water shield where it belongs, properly lapped underlayment, correct nailing patterns, and ventilation sized to the space. That's a roof that lasts.
Get a Free Quote →Metal Roofing
Metal roofing works on pitches as low as 3:12 for standing seam and as low as 1:12 with specific underlayment and sealant requirements. Steep pitches look incredible in metal. We help you choose the right panel profile, material, and color for your Brunswick home.
Get a Free Quote →Shingle Roofing
GAF Timberline HDZ. The best-selling shingle in North America. With StrikeZone nailing area for consistent fastener placement. Class A fire rating per UL 790, Class 4 impact resistance per UL 2218 (when installed in the GAF Roof System), and Class H wind rating per ASTM D7158 (130 mph). We install Timberline in the full GAF system to qualify for Golden Pledge warranty: 25-year non-prorated workmanship plus 50-year materials with WindProven limited wind warranty (no max speed). That warranty is why we recommend GAF for most Brunswick homes.
Get a Free Quote →Flat Roofing
TPO single-ply membrane is our most-installed flat roof system in Brunswick. White reflective surface reduces cooling costs, hot-air welded seams are watertight, and 15-20 year manufacturer warranties are standard. Available in 45-mil, 60-mil, and 80-mil thickness.
Get a Free Quote →Commercial Roofing
For commercial kitchens and restaurants in Brunswick, PVC membrane is the only option that resists animal fat and chemical exposure from rooftop grease exhaust. We install IB Roof Systems and Duro-Last PVC with heat-welded seams and custom accessories. Modified bitumen with SBS or APP polymer-modified asphalt for high-traffic commercial roofs. Two-ply systems with 20-year NDL (No Dollar Limit) warranties from Johns Manville or Firestone.
Get a Free Quote →Gutter Installation
We install gutter guards for homeowners who are done cleaning gutters twice a year. Micro-mesh over the opening, screwed into the front lip. Leaves and pine needles sit on top and blow off. Not 100% maintenance-free, but close. You might hose them once a year.
Get a Free Quote →Roof Inspection
Roof inspections are free for Brunswick homeowners. No strings, no obligation to hire us for repairs. If your roof is fine, we say so. If it needs attention, you get an honest assessment of what's going on and what it'll cost to fix.
Get a Free Quote →Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →